Hobby 2000 80018 Masking Tape For Curves 4,5mm x 18m

Brand: Hobby 2000

Hobby 2000 80018 Masking Tape For Curves 4.5 mm x 18 m is a flexible blue masking tape 4.5 mm wide and 18 m long. It is designed for curves, curved lines, and multicolored camouflage when working with a brush or airbrush.

Availability In stock (5 ks)
Delivery to:
02.09.2026
Delivery options
Code: 159-H2K80018
€2,20 Measure price:
Hobby 2000 80018 Masking Tape For Curves 4,5mm x 18m
Brand: Hobby 2000

Hobby 2000 80018 Masking Tape for Curves 4.5 mm x 18 m is a flexible modeling masking tape made of blue film. The narrow 4.5 mm width conforms well to curves and curved surfaces, where standard paper tape easily creases. The tight-fitting edge helps minimize paint bleed and create a clean transition.

What it’s good for

  • curved camouflage lines, colored stripes, and rounded transitions
  • masking aircraft fuselages, vehicle fronts, fuel tanks, wheel rims, and other rounded parts
  • use with both a brush and an airbrush

Recommended Procedure

  1. Clean the surface and allow the primer to cure completely.
  2. Run the tape along the desired curve without pulling it too tightly, and press it down continuously, especially along the painted edge.
  3. Apply the paint in several thin layers. When spraying, aim the spray stream perpendicular to the surface or away from the edge of the mask.
  4. Remove the tape slowly at a low angle. On pigmented surfaces, first test adhesion in a less visible area.

Technical Specifications

  • Type: flexible masking tape for curves
  • Width: 4.5 mm
  • Length: 18 m
  • Material: flexible blue film

For further work, you can use masks and masking tools, airbrush equipment, and model paints.

Category: Masks
EAN: 5903002058978

Alternative products

Fi 156 Storch 1/72 recommended for ACADEMY
€3,90

EDUARD Fi 156 Storch 1/72 recommended for ACADEMY is a 1/72 scale masking template designed for the ACADEMY kit.

Code: 103-CX077
RSO Pak 40/4 75mm wheel masks recommended for DRAGON
€8,10

EDUARD RSO Pak 40/4 75mm wheel masks recommended for DRAGON is a masking template designed for the DRAGON kit.

Code: 103-XT169
Mirage III Weekend 1/48 recommended for EDUARD
€5,40

The Eduard Mirage III Weekend 1/48 is a pre-cut masking template for the EDUARD model kit. Manufacturer's catalog number: EX239.

Code: 103-EX239
Wyvern S.4 1/48 recommended for TRUMPETER
€4,60

EDUARD Wyvern S.4 1/48 recommended for TRUMPETER is a 1/48 scale masking template designed for the TRUMPETER kit.

Code: 103-EX201
Sea Hurricane Mk.I 1/48 recommended for AIRFIX
€6

EDUARD Sea Hurricane Mk.I 1/48 recommended for AIRFIX is a 1/48 scale masking template designed for the AIRFIX kit.

Code: 103-EX571
Bf 109F 1/48 recommended for HASEGAWA
€3,30

EDUARD Bf 109F 1/48 recommended for HASEGAWA is a 1/48 scale masking template designed for the HASEGAWA kit.

Code: 103-EX018
A6M2 Zero 1/32 recommended for TAMIYA
€3,90

EDUARD A6M2 Zero 1/32 recommended for TAMIYA is a 1/32 scale masking template designed for TAMIYA model kits.

Code: 103-JX058
F-105D Thundershief 1/48 recommended for MONOGRAM
€4,60

EDUARD F-105D Thundershief 1/48 recommended for MONOGRAM is a 1/48 scale masking template designed for the MONOGRAM kit.

Code: 103-EX143