BAe Hawk T.2 exhaust nozzle with air brakes for HobbyBoss kit (3D Printed) (1/48)
The BAe Hawk T.2 Exhaust Nozzle with Air Brakes for the HobbyBoss Kit (3D Printed) is a set of exhaust nozzles or exhausts in 1/48 scale from RESKIT. The set is designed for the HobbyBoss kit. It enhances the engine area, where the exhaust nozzles are very clearly visible on the finished aircraft.
The BAe Hawk T.2 Exhaust Nozzle with Air Brakes for the HobbyBoss Kit (3D Printed) is a set of exhaust nozzles or exhausts in 1/48 scale from RESKIT. The set is designed for the HobbyBoss kit. It enhances the engine area, where the exhaust nozzles are very clearly visible on the finished aircraft.
The parts are 3D-printed, so they feature fine detail and require careful separation from the support structures.
This is an add-on set; neither the base kit nor the model shown in the photo is included in the package.
Recommended Use
- Type: Exhaust nozzle or exhaust set
- Scale: 1/48
- Compatibility: for HobbyBoss kits
- Before gluing, test-fit the parts against the model to verify the fit.
- Carefully separate resin or 3D-printed parts using a sharp tool and smooth them with light sanding.
- Use cyanoacrylate adhesive for gluing; we recommend applying a primer before painting.
You’ll also need model glue, base coats, primers, and model paints to work with this kit.
| Category: | Detail Sets |
|---|---|
| EAN: | 4824594202765 |
| Scale: | 1/48 |
