1/72 I.A.R. 80/81 Wheels Groove Pattern (used from 1942)
IBG Models 3D-printed wheels for I.A.R. 80/81 in 1:72 scale replace the kit parts with a more precise set. The wheels have a groove tread pattern, a version used from 1942. The set is designed for all IBG Models I.A.R. 80/81 kits.
1/72 I.A.R. 80/81 Wheels Groove Pattern (used from 1942)
IBG Models 3D-printed wheels for I.A.R. 80/81 in 1:72 are detailed replacements for the kit wheels. The groove tread pattern corresponds to the version used from 1942 and preserves fine detail on the hubs, sidewalls and tread. The set is designed for all IBG Models I.A.R. 80/81 kits.
Set Purpose
- Model: I.A.R. 80/81
- Scale: 1:72
- Variant: groove tread pattern
- Time Period: used from 1942
- Compatibility: all IBG Models I.A.R. 80/81 kits
- Technology: 3D printing
Recommended Procedure
- Before removing the support structures, compare the wheels with the kit’s landing gear and verify that you have the correct variant based on the selected reference.
- Remove the 3D-printed support structures one by one using fine-tip pliers or a scalpel; smooth out the contact points by lightly sanding them.
- Test-fit the parts on the landing gear axles without glue. Make any necessary adjustments to the holes in small increments to ensure the wheel remains properly seated.
- Degrease the surface, apply a thin coat of primer, and paint the tire and rim separately. Accent the tread pattern with a light wash and dry pigment to match the model’s environment.
- Attach the wheels with a small amount of cyanoacrylate adhesive; standard polystyrene glue will not bond 3D-printed material.
Note: The plastic kit is not included in the package.
Use model paints and primers and adhesives suitable for 3D-printed parts to finish the model.
| Category: | Detail Sets |
|---|---|
| EAN: | 5907747903180 |
| Scale: | 1/72 |
