1/72 PZL P.11 Radiator and Venturi Tube (3D printed set)
IBG Models 72U013 is a 3D-printed detail set for radiator and Venturi tube for the PZL P.11 in 1:72 scale. It contains a separate finned radiator and Venturi tube and is designed for all IBG Models PZL P.11a, P.11b and P.11c kits.
1/72 PZL P.11 Radiator and Venturi Tube (3D printed set)
IBG Models 72U013 – radiator and Venturi tube for the PZL P.11 in 1:72 scale replaces the kit parts with more precisely defined 3D prints. The set contains a separate finned radiator and Venturi tube and is designed for all IBG Models PZL P.11a, P.11b and P.11c kits. Fine fins, mesh and edges remain visible under a thin primer coat.
Set application
- Part: radiator and Venturi tube for the PZL P.11
- Scale: 1:72
- Compatibility: all IBG Models PZL P.11a, P.11b and P.11c kits
- Technology: 3D printing
Recommended procedure
- Remove supports gradually with fine cutters and a knife to avoid damaging fins and thin edges.
- Test-fit the part and verify its orientation against the kit instructions.
- Degrease the surface and apply a very thin primer coat that will not fill the radiator texture.
- Emphasise the mesh depth with a thin wash and carefully highlight the edges with dry brushing.
- Fix the parts with a small amount of cyanoacrylate adhesive; polystyrene cement will not bond the 3D print.
Note: the plastic kit is not included.
Use model paints and primers and adhesives suitable for 3D-printed parts to finish the set.
| Category: | Detail Sets |
|---|---|
| EAN: | 5907747902534 |
| Scale: | 1/72 |
