1/48 BF109 E/F/G2 - early version 650X150
The Miryoku Bf 109 E/F/G-2 Wheels (Early Version) are detailed 3D-printed wheels for the Messerschmitt Bf 109 E, F, and G-2 in 1:48 scale. The set includes two main wheels (650 × 150), a tail wheel (350 × 135), and masks for precise painting of the rims.
1/48 BF109 E/F/G2 - early version 650X150
The Miryoku Bf 109 E/F/G-2 wheels (early version) replace the kit wheels for the Messerschmitt Bf 109 E, F, and G-2 models in 1:48 scale. These are early versions of the wheels; so the set helps preserve the correct appearance of the landing gear for the selected aircraft variant.
Set Contents and Design
- Contents: two complete main landing gear wheels with 650 × 150 tires, one tail wheel (350 × 135), and masks for precise painting of the rims
- Main wheels: 650 × 150 tires
- Tail wheel: 350 × 135
- Technology: 3D printing with fine detail on the tread and rim structure
- Painting masks: included in the package; facilitate clean separation of the tire and rim paint
Recommended Workflow
- Before separating and modifying the wheels, compare them with the kit parts and verify that you have the correct variant based on your chosen design.
- Carefully remove the 3D printing support structures, clean up the contact points with light sanding, and test-fit the parts without glue.
- Degrease the surface and apply a thin layer of primer suitable for 3D printing.
- First, paint one side of the wheel; once dry, use the included masks and apply the second color. Before spraying, press the masks firmly around the rim’s circumference.
- Secure the wheels with cyanoacrylate adhesive; standard polystyrene glue will not bond 3D-printed material.
Note: The basic plastic model kit is not included in the package. To complete the model , use model paints, primers, and adhesives suitable for 3D-printed parts.
