1/32 A6M5c Zero – Wing Flaps Set / for Hasegawa ki

CMK A6M5c Zero – Flaps for Hasegawa is a 1:32-scale resin set of flaps designed for the Hasegawa A6M5c Zero plastic model. The kit adds highly detailed flaps and their internal structure for building the aircraft with the flaps extended.

Benefits for the Model

This is a targeted accessory for a specific part of the build, not a universal kit. It helps refine this particular area of the model and highlight details that are clearly visible on the finished model.

Recommended Procedure

1. Before separating the parts, compare the resin parts with the assembly instructions and dry-fit them to verify their position.
2. Remove the sprues gradually using a fine-toothed saw or by sanding. When sanding the resin, use a wet sanding method and avoid inhaling the resulting dust.
3. Degrease the parts, let them dry, and glue them together using cyanoacrylate or two-part epoxy adhesive; standard polystyrene glue will not bond the resin.
4. Before painting, apply a suitable primer and then proceed with paints corresponding to the chosen reference model.

Note: The basic plastic model kit is not included in the package. For assembly, refer to adhesives suitable for resin, and for finishing, use model paints and primers.