AK Acrylic Auxiliary Products Modeling White Putty (20ml / 39gr)
AK103 Modeling White Putty (20 ml / 39 g) is a fine-grained, white, single-component, water-based modeling putty. It adheres well, does not shrink as it dries, and is easy to sand once cured.
AK Acrylic Auxiliary Products Modeling White Putty (20ml / 39gr)
AK103 Modeling White Putty (20 ml / 39 g) is a high-quality, white, single-component, water-based polyurethane modeling putty with an extra-hard finish. The fine filler is suitable for filling seams, sprue marks, small dents, and other imperfections on models and miniatures.
The putty has good adhesion, does not shrink as it dries, and sands well once fully cured. Fresh residue can be removed from tools and the repair area with water.
Recommended Procedure
- Clean, dry, and degrease the surface.
- Using a putty knife or modeling tool, apply a small amount directly to the defect.
- Smooth the surface and remove any excess before it dries.
- For thicker repairs, it is better to apply several thinner layers.
- Allow the filler to cure completely before sanding.
Technical Information
- Type: single-component, water-based polyurethane filler
- Color: white
- Packaging: 20 ml / 39 g
- Cleaning fresh sealant: water
| Category: | Putty & Thinners |
|---|---|
| Weight: | 0.02 kg |
| EAN: | 8436564920676 |
