AK Enamel Effects Black Pin Wash (35 ml)

AK Interactive AK326 Black Pin Wash (35 ml) is a precise enamel pin wash in black. Its special formula targets selected details, using capillary action to highlight volume, rivets, joints, and small recesses without spreading unnecessarily over large areas.

The manufacturer recommends it for dark colors and parts that require maximum contrast. The black shade creates the most pronounced separation of details and is suitable where brown washes do not provide sufficient contrast.

Recommended Procedure

1. Shake the bottle thoroughly to ensure the pigment is evenly mixed.
2. Apply to a fully cured, painted surface. AK Interactive recommends a glossy or satin base, which promotes capillary action and makes it easier to remove excess product. If using an unfamiliar combination, first test compatibility on a hidden area.
3. Using a fine brush, apply a small amount around a rivet, detail, or panel line. Allow the product to rise and work in small sections.
4. After a short drying time, remove the excess with a brush or cotton swab lightly moistened with White Spirit or an odorless thinner.
5. Allow the enamel layer to dry thoroughly before applying any further effects or the final coat of paint.

For thinning, corrections, and cleaning, use AK Interactive White Spirit 35 ml. For finer work and less odor, AK Interactive Odorless Thinner 35 ml is recommended.

Technical Information

• Type: Enamel pin wash
• Shade: black
• Intended Use: dark colors and parts that require maximum contrast
• Application: a fine, pointed brush for a precise pin wash
• Thinning and Cleaning: White Spirit or Odorless Thinner
• Volume: 35 ml

This is a solvent-based product. Work in a well-ventilated area and follow the safety instructions on the label.