AK Interactive AK8017 Terrains Muddy Ground (250 ml)
AK Interactive AK8017 Terrains Muddy Ground (250 ml) is a 250 ml acrylic terrain paste for creating a thick, dense, and distinctly textured layer of mud. Before it dries, you can press deeper wheel and track tracks into the surface. It takes approximately 24 hours to dry completely.
AK Interactive AK8017 Terrains Muddy Ground (250 ml)
AK Interactive AK8017 Terrains Muddy Ground (250 ml) creates a strong, dense, and distinctly textured layer of mud. This colored acrylic paste combines color and texture in a single step and is designed for dioramas, vignettes, figure bases, and wargaming terrain.
Recommended Procedure
- The surface must be solid, clean, and free of dust. Smooth or non-absorbent surfaces should be roughened or primed beforehand.
- Stir the paste thoroughly before use to ensure the binder and filler are evenly mixed.
- Apply with a putty knife or an old brush. A thin layer will even out the surface, while a thicker layer will create its own texture.
- While the paste is still wet, adjust the texture with a damp tool. You can increase the fluidity by adding a small amount of water or acrylic thinner.
- Build up the volume gradually, adding the next layer only after the previous one has dried.
Before it dries, you can press deeper wheel and track marks into the surface. Full curing takes approximately 24 hours.
Technical Information
- Type: water-based acrylic terrain paste
- Effect: a thick, dense, and distinctly textured layer of mud
- Volume: 250 ml
- Application: putty knife, old paintbrush, or modeling tool
- Layering: suitable for both thin and thicker layers
- Thinning: water or acrylic thinner for better flow
- Tool cleaning: with water before it dries
| Category: | Diorama |
|---|---|
| Weight: | 0.3 kg |
| EAN: | 8436564920997 |
