AK Enamel Effects Wet Effects Fluid (35 ml)

AK Interactive AK079 Wet Effects Fluid (35 ml) is an enamel modeling effect for creating localized traces of rain, puddles, running water, moisture, and wet surfaces on models. Shade: transparent. Result: a variable wet sheen depending on the base coat. This is not a standard glossy varnish, but an effect product designed to create varying intensities of a wet appearance. Volume: 35 ml.

Availability In stock (4 ks)
Delivery to:
15.10.2026
Delivery options
Code: 143-AK079
€3,90 Measure price:
AK Enamel Effects Wet Effects Fluid (35 ml)

AK Interactive AK079 Wet Effects Fluid (35 ml) Creates a realistic appearance of rain, puddles, running water, and locally wet areas. This is not a standard glossy varnish, but a special-effect product designed to produce varying degrees of a wet look. The intensity of the sheen is influenced by the amount of product applied and the surface beneath it.

Recommended Procedure

  1. Work on a fully cured surface and test compatibility with the paints and varnishes used in an inconspicuous area.
  2. Using a fine brush, apply a small amount only to areas where water naturally pools or runs. For puddles, apply several thin layers instead of one thick one.
  3. Softly blend the edges with a brush lightly dampened with White Spirit. Leave some areas almost dry so the wet look doesn’t appear too uniform.
  4. Add the next layer only after the previous one has dried. This effect can be combined with earthy tones to create wet mud.
  5. Allow the layer to dry thoroughly before applying another coat or another enamel effect.

Use AK Interactive White Spirit 35 ml to blend and remove excess. For finer work and less odor, AK Interactive Odorless Thinner 35 ml is recommended.

Technical Information

  • Type: wet-surface enamel effect
  • Shade: transparent
  • Result: variable wet sheen depending on the substrate
  • Intended Use: localized rain marks, puddles, running water, moisture, and wet areas on models
  • Application: fine brush, applied locally in thin layers
  • Blending and cleaning: White Spirit or Odorless Thinner
  • Volume: 35 ml

This is a solvent-based product. Work in a well-ventilated area and follow the safety instructions on the label.

Category: Weathering and Patina
Weight: 0.04 kg
EAN: 8436535570794

Alternative products

25784 143 ak2073
€3,90

AK Interactive AK2073 Paneliner for Sand and Desert Camouflage (35 ml) is a ready-to-use enamel panel liner with a fine capillary flow designed to...

Code: 143-AK2073
33587 143 ak4161
€3,90

AK Interactive AK4161 Neutral Grey Filter (35 ml) is an enamel modeling filter for very light and white surfaces. Shade: neutral gray. It is...

Code: 143-AK4161
25732 143 ak2074
€3,90

AK Interactive AK2074 Paneliner for White and Winter Camouflage (35 ml) is a ready-to-use enamel panel liner with a fine capillary flow designed to...

Code: 143-AK2074
33490 143 ak4162
€3,90

AK Interactive AK4162 Blue Green Filter for Green Camouflage (35 ml) is an enamel modeling filter for green camouflage on vehicles, aircraft,...

Code: 143-AK4162
25464 ak455
€6,30

AK Interactive True Metal AK455 Aluminium (20 ml) is a metallic wax paint in an aluminum shade. Apply with a brush, finger, cotton swab, or—after...

Code: 143-AK455
25752 ak450
€6,30

AK Interactive True Metal AK450 Gold (20 ml) is a wax-based metallic paint in a gold shade. Apply with a brush, finger, cotton swab, or—after...

Code: 143-AK450
35175 143 ak144
€3,90

AK Interactive AK144 Burnt Rust Red Pigment (35 ml) is an ultra-fine dry modeling pigment; its shade is a burnt rusty red. It is designed for the...

Code: 143-AK144
33496 143 ak2019
€3,90

AK Interactive AK2019 Aircraft Engine Oil (35 ml) is an enamel modeling effect for oil stains and leaks on engines, mechanical parts, and...

Code: 143-AK2019