AK Enamel Effects Rust Streaks (35 ml)
AK Interactive AK013 Rust Streaks (35 ml) is an enamel modeling effect for vertical rust streaks under screws, joints, and damaged areas on models. Appearance: realistic rusty hue. The product is intended for targeted rust marks, not for painting the entire surface. Volume: 35 ml.
AK Interactive AK013 Rust Streaks (35 ml) Used to create a realistic rusty hue. It is designed for vertical rust streaks under screws, joints, and damaged areas on models. The product is intended for targeted rust marks, not for painting the entire surface.
Recommended Procedure
- Shake the bottle thoroughly and work on a completely cured surface.
- Using a fine, pointed brush, apply short, irregular lines and streaks to areas where such marks would naturally form.
- Let the product dry for approximately 10 minutes. Then, using a clean flat brush lightly moistened with White Spirit, soften the streaks in the direction they would naturally run.
- Vary the length and intensity of the streaks. Once dry, selected areas can be enhanced with another thin coat.
- Allow the layer to dry thoroughly before applying another coat of paint or another enamel effect.
Use AK Interactive White Spirit 35 ml to blend and remove excess. For finer work and less odor, AK Interactive Odorless Thinner 35 ml is recommended.
Technical Information
- Type: Enamel modeling effect
- Appearance: realistic rusty shade
- Intended Use: Vertical rust streaks under screws, joints, and damaged areas on models
- Application: a fine, pointed brush and a flat brush for blending
- Thinning and cleaning: White Spirit or Odorless Thinner
- Volume: 35 ml
This is a solvent-based product. Work in a well-ventilated area and follow the safety instructions on the label.
| Category: | Weathering and Patina |
|---|---|
| Weight: | 0.04 kg |
| EAN: | 8436535570138 |
