AH-1G "Cobra" main rotor for ICM kit (3D Printed) (1/35)
The AH-1G "Cobra" Main Rotor for ICM Kit (3D Printed) is a set of 1/35-scale rotor parts from RESKIT. The set is designed for the ICM kit. It is intended to enhance the accuracy of the helicopter’s rotor section and add details that are often simplified in the basic parts.
The AH-1G "Cobra" Main Rotor for ICM Kit (3D Printed) is a set of 1/35-scale rotor parts from RESKIT. The set is designed for the ICM kit. It is intended to enhance the accuracy of the helicopter’s rotor section and add details that are often simplified in the basic parts.
The parts are 3D-printed, so they feature fine detail and require careful separation from the support structures.
This is an add-on set; neither the base kit nor the model shown in the photo is included in the package.
Recommended Use
- Type: Rotor Parts Set
- Scale: 1/35
- Compatibility: for the ICM kit
- Before gluing, test-fit the parts against the model to verify the fit.
- Carefully separate resin or 3D-printed parts using a sharp tool and smooth them with light sanding.
- Use cyanoacrylate adhesive for gluing; we recommend applying a primer before painting.
You will also need model glue, base coats, primers, and model paints to work with this kit.
| Category: | Detail Sets |
|---|---|
| EAN: | 4824592300500 |
| Scale: | 1/35 |
