Revell 65403 Viking Ship ModelSet 1/50

The Viking Ship (1:50) is a 1:50 scale plastic model kit from Revell. The kit is designed to be glued, painted, and finished according to the instructions.

The ModelSet series is especially suitable when you want the basic supplies needed to build the model included right in the kit: selected paints, a brush, and glue.

Manufacturer Details and Recommendations

Model ship kit for assembly. Scale: 1:50; 38.5 cm. Package includes: 131 parts for assembly, glue, a paintbrush, and paints.

Information about the model and the original:


Required paints:
- base colors:
- Additional:

Model details:
Scale: 1:50
Number of parts: 131
Length: 385 mm
Height: 237 mm
Difficulty: 3

Recommended for children ages 10 and up.

Warning: Choking hazard! This product contains small parts. NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE! Humbrol Acrylic Paint for Modelers
Instructions for Use: Water-mixable acrylic paint. Stir the paint well before use. Apply with a brush directly from the can. When using an airbrush, thin with a suitable thinner, such as water. Two thin coats are better than one thick coat. The usual mixing ratio is 2:1 in favor of the paint. Non-flammable base, dries quickly; 1–2 hours to dry completely, slightly longer for gloss and metallic finishes. Dilute with water if necessary. Using an unsuitable thinner may ruin the paint! Rinse brushes and tools with water immediately after use. Close the container tightly after use. Use as soon as possible after opening; the paint dries when exposed to air. Protect from freezing. Contains preservatives: 5-chloro-2-methyl-2H-isothiazol-3-one, 2-methyl-2H-isothiazol-3-one (3:1), and 2-phenoxyethanol.
Warning: Keep out of reach of children. Caution! Not suitable for children under 8 years of age. Children may use this product only under adult supervision.

Poly Cement ( 5 ml)
A solvent-based adhesive suitable exclusively for bonding models.
Instructions for Use: Use on common plastics used in model making, including polystyrene and ABS. Press the surfaces together with gentle pressure until they hold. The joint dries in 10–20 minutes and cures completely in 1 hour. Read and keep this label.
Warning! Flammable liquid and vapors. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Keep out of reach of children. Avoid inhaling vapors. IF INHALED: Move the person to fresh air and keep them in a position that facilitates breathing. Store in a well-ventilated area. Keep the container tightly closed.
Warning! Not suitable for children under 8 years of age. Children may use this product only under adult supervision.

Model Details

• Scale: 1:50
• EAN: 4009803065403
• Number of parts: 131
• Length: 385 mm
• Difficulty: 3

For assembly, we recommend suitable model glue, paints, a brush, and basic modeling tools.