AK Terrains Wet Ground - (acrylic) (250 ml)
AK Interactive AK8016 Terrains Wet Ground (250 ml) is a 250 ml acrylic terrain paste for wet soil and damp natural surfaces. Before it dries, you can imprint wheel tracks, track marks, or terrain irregularities into the surface. It takes approximately 24 hours to dry completely.
AK Interactive AK8016 Terrains Wet Ground (250 ml) creates wet soil and a damp natural surface. This colored acrylic paste combines color and texture in a single step and is designed for dioramas, vignettes, figure bases, and wargaming terrain.
Recommended Procedure
- The surface must be solid, clean, and free of dust. Smooth or non-absorbent surfaces should be roughened or primed beforehand.
- Stir the paste thoroughly before use to ensure the binder and filler are evenly mixed.
- Apply with a putty knife or an old brush. A thin layer will even out the surface, while a thicker layer will create its own texture.
- While the paste is still wet, adjust the texture with a damp tool. The consistency can be increased with a small amount of water or acrylic thinner.
- Build up the volume gradually, adding the next layer only after the previous one has dried.
Before it dries, you can imprint wheel tracks, tracks, or terrain irregularities into the surface. Full curing takes approximately 24 hours.
Technical Information
- Type: water-based acrylic terrain paste
- Effect: wet soil and damp natural surfaces
- Volume: 250 ml
- Application: putty knife, old paintbrush, or modeling tool
- Layering: suitable for both thin and thicker layers
- Thinning: water or acrylic thinner for better flow
- Tool cleaning: with water before it dries
| Category: | Diorama Terrains |
|---|---|
| Weight: | 0.3 kg |
| EAN: | 8436564920980 |
